Uncompromising installation

The quick coupling greatly reduces the time taken. The average time spent installing a cable from luminaire to driver is 60 seconds. Using the quick coupling in Pleiad G4, this step only takes a second, corresponding to a time and cost saving of one hour when installing 60 Pleiads. The installation time can be further reduced by supplementing with Wieland, WAGO or Ensto quick couplings on the primary side.

Pleiad G4 complies with our Twin Dual Driver. This enables power supply to two luminaires with only one driver and up to 4.8 meters between the luminaires. Twin Dual Driver supports light control via DALI or OR. By streamlining the electronics and the product's material composition, we have managed to reduce the total environmental impact of the driver by 45 per cent — while maintaining safety and significantly streamlining both installation and product use. 

Installation in suspended ceilings is carried out without tools and physical exertion using an innovative spring design. The housing need only be placed in the right position and then it is installed automatically using gravity.

Pleiad G4 is available with a retrofit kit as an accessory for quick mounting in the suspended ceiling’s existing apertures. The surface-mounted variant has a casing that can be mounted in two positions. The lower position allows installation of a surface-mounted cable from any direction.